Why is my sump pump running constantly?

Constant running usually means a stuck float switch, a failed check valve letting water flow back, or a pump undersized for the water volume. We diagnose which it is and fix it before the motor burns out. Call (980) 206-3523 for service.

My pump won't turn on, what's wrong?

A pump that won't start could have a stuck or failed float switch, a tripped breaker, or a dead motor. We test the whole system to find the cause, since a pump that won't run is a flood waiting to happen.

Should I add a battery backup?

In a storm-prone area, it's worth considering. Sump pumps fail most often during the same storms that knock out power, and a battery backup keeps the pit clearing when the grid goes down. We can add one during the repair.

Sump Pump Repair in Huntersville and Cornelius

SCHEDULE (980) 206-3523

Storm-Ready Sump Pump Repairs Have Never Been Easier

A sump pump that fails during a heavy Piedmont downpour is how basements and crawl spaces flood. Is your sump pump functional? If not, we’re here to help. Roland Black’s licensed, insured plumbers have kept pumps running across the Lake Norman area for over 50 years, with 24/7 emergency service for times when the water is already rising. We diagnose the float, switch, and motor and get the pit clearing reliably before the next storm rolls through. Call us today at (980) 206-3523 to book your free estimate.

Licensed & Insured

Technicians serving in NC & SC

50+ Years of Experience

Serving homeowners since 1973

24/7 Emergency Service

Rapid response—day or night

Trusted Brands

American Standard Platinum, Generac, Kholer & more

Certifications

American Standard, NATE, Customer Care Dealer, Trane Authorized Dealer

Community Involvement

Dream on 3, Absolute Hope Foundation

Sump Pump Repair

$89 diagnostic

Same Day Service

CONTACT CALL

On This Page

What’s Included in a Sump Pump Repair?

We test the pump, float switch, and check valve to find the fault.
We clear debris from the pit and inspect the discharge line.
You get an upfront price and an honest repair-versus-replace read.
We make the repair and confirm the pump cycles and clears water correctly.

Get In Touch

How Much Does Sump Pump Repair Cost?

Most sump pump repairs in the Huntersville and Cornelius area run $400 to $550, depending on the failed part, as Angi’s sump pump cost data notes, with after-hours emergency calls adding to that. A stuck float or check valve sits at the low end; motor problems run higher. On an older pump facing a major fix, we’ll tell you when replacement is the smarter spend.

Common Sump Pump Problems We Resolve

The sump pump calls we get across Huntersville and Cornelius usually come down to a few common failures.

The float that tells the pump to run can jam against the pit wall or fail, leaving the pump running nonstop or not at all. We free or replace it so the pump cycles correctly.

A bad check valve lets pumped water flow back into the pit, making the pump cycle over and over and wear out early. Replacing it stops the backflow and the short-cycling.

Debris in the pit clogs the intake and years of use wear the motor, both of which cut the pump’s ability to clear water. We clean the pit and test the motor, replacing the pump when it’s spent.

SCHEDULE (980) 206-3523

Financing
Options

Get the confort you need today-Pay over time

Check our Financing Options

Membership
Plans

Join and enjoy exclusive member benefits

Check our membership plans

Areas We Service

North Carolina

Gastonia
Belmont
Cramerton
Mt Holly
Charlotte
Huntersville
Denver
Cornelius
Davidson
Lincolnton
Maiden
Iron Station
Stanely
Pineville
Matthews
Hickory
Concord
Mooresville
Kings Mountain
Dallas
Cherryville
Waxhaw
Marvin
Weddington
Indian Trail
Kannapolis

South Carolina

Tega Cay
York
Rock Hill
Fort Mill

Roland Black: Your Local Sump Pump Repair Experts

When heavy rainfall causes groundwater to rise, a malfunctioning sump pump puts your basement and crawl space at immediate risk of flooding. Roland Black is licensed in North Carolina with a BBB A+ rating, repairing floats, switches, and motors on pedestal, submersible, and battery backup systems. Our emergency fixes prevent severe water and mold damage, with all work fully backed by our labor guarantee. Contact us today to learn more.

Why is my sump pump running constantly? Constant running usually means a stuck float switch, a failed check valve letting water flow back, or a pump undersized for the water volume. We diagnose which it is and fix it before the motor burns out. Call (980) 206-3523 for service.
My pump won’t turn on, what’s wrong? A pump that won’t start could have a stuck or failed float switch, a tripped breaker, or a dead motor. We test the whole system to find the cause, since a pump that won’t run is a flood waiting to happen.
Should I add a battery backup? In a storm-prone area, it’s worth considering. Sump pumps fail most often during the same storms that knock out power, and a battery backup keeps the pit clearing when the grid goes down. We can add one during the repair.

We keep the sump pumps Huntersville and Cornelius basements depend on ready for the next storm. When a pump is past repair, we handle sump pump installation, and for homes on wells our well repair team can help. Discharge or drainage issues? Our water line repair covers those lines too.

The pump runs constantly or won’t shut off.
It won’t turn on when the pit fills.
Loud grinding, rattling, or vibrating.
Water backing up in the pit or basement.
A pump that’s more than 7 to 10 years old.

A dead sump pump is a flooded basement waiting to happen. Call Roland Black at (980) 206-3523 for repair, with same-day and 24/7 emergency service when water is rising.

SCHEDULE (980) 206-3523

Related Services